Getting Started Chapter 1. You can attach a serial mouse or other serial devices directly to the connector. The spare drive can take over for a failed disk. Mark the Disk as a Free Disk 1. Once a dedicated disk has been assigned to a particular array, it can be removed at any time.
|Date Added:||20 February 2014|
|File Size:||67.10 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Getting Started Chapter 1. Cylinder Number of cylinders.
Load Optimized Defaults Use this menu to load the BIOS values for the best system performance, but the system stability may be affected. The total disk space used is Choose [Enabled] to activate each channel separately. Comments to this Manuals Your Name.
Chassis Intrusion Detect The field enables or disables the feature of recording the chassis intrusion status and issuing a warning message if the chassis is once opened. RAID 0 defines a disk striping scheme that improves the disk read and write times for many applications. This is the array to which you want to allocate the dedicated free disk.
Page 83 Introduction to DigiCell Left-wing: Date This allows you to set the system to the date that you want usually the current date. Technical Support Alternatively, please try the following help resources for further guidance. The system will install the necessary components from your Microsoft Setup CD immediately. The first icon indicates the onboard LAN on your system, the second icon indicates the wireless LAN status, and the third one is the information about the bluetooth on your system.
Page 81 Introduction to DigiCell 3. All data is copied from one hard drive to another and then the data is synchronized between the two hard drives. Change these settings only if you are familiar with the chipset. The aperture is a portion of the PCI memory address range dedicated to graphics memory address space.
You can clear CMOS by shorting pin while the system is off. Power on Agent In this sub-menu, you can configure date, time and auto-executed programs of the power-on, power-off and restart features.
The Optimized Defaults are the default values set by the mainboard manufacturer specifically for optimal performance of the mainboard. AGP is an interface specification designed for the throughput demands of 3D graphics. Click on each icon appearing above to enter the sub-menu to make further configuration. The Main Menu allows you to select from twelve setup func- tions and two exit choices.
MSI K7N2 Delta2-LSR, Socket A, AMD (MS-6570E-030) Motherboard
Even though the Dynamic Overclocking Technology is more stable than manual overclocking, basically, it is still risky. Don’t have an account? Once a dedicated disk has been assigned to a particular array, it can be removed at any time. Check the disk in the list if you want to make the array a dynamic disk, then click Next.
MSI K7N2 Delta2-LSR, Socket A, AMD (MSE) Motherboard | eBay
Msk default settings are configured for your usage. The items under each BIOS category described in this chapter are under continuous update for better system performance. The system will record this status and show a warning message 6750e the screen. The connector location and pin assignments are as follows The pop- up menu appears. In a typical system there is usually one controller and multiple channels, and each chan- nel has a slave and a master.
You can connect a network cable to either LAN jack. Make sure to Plate raise the lever up to a de- gree angle. Page 71 Power on Agent In this sub-menu, you can configure date, time and auto-executed programs of the power-on, power-off and restart features.